Friday, January 11, 2013

Creative DIY ideas to make a fun kid zone inside.

With winter in Chicago, my thoughts have gone to how to entertain kids indoors. The decorator in me wanted to see some unique ideas for turning a basement or play room into a fabulous indoor space. While our basement is pretty much done, we did include a few fun things to keep the kids busy.

INDOOR HOME SLIDES
 We have a slide built in to the walls, a swing hung from the ceiling and air hockey, foosball and shuffleboard tables. If you want to see our space you can see in here.


Maybe you have a straight shot of stairs (we didn't have that option) that you could do something similar to these ideas (they would be a lot easier than what we had to do.) For a slick surface try either the white shower board (mounted on something solid since it's only about 1/4" thick or high grade plywood, finished with a smooth paint or varnish.




LEARNING FUN
Ever thought of putting up a pulley somewhere? While this one if pretty fancy, I'm sure you could make a real basic one with a pulley from a hardware store.  I'd be careful and use under supervision to avoid any threats of choking or getting tangled up in it.
a toy garden


Make a latch board and hang low on a wall.  This will provide a lot of hands-on learning that is so fun. 


After seeing this, I just HAD to make one.  I realized that things could add up in cost pretty quickly, so I did some looking around.  I found tons of great things at our Habitat ReStore. The best is that they have kitchen cabinet doors for $1 and that made a perfect backing!  I also found a few latches at Big Lots, then finally hit Menards.  Here's how mine turned out:




See the darling little pulley I found at Menard's?  I just used some cording and large beads for weights.
This was so much fun to make and really didn't take that much time.  No only did the little guy like it, but even my teenagers were playing around with it! It's just that irresistable.

This was another cute version that used a magnetic surface (heating duct sheeting from Home Depot) and then surrounded it with the latches.  Definitely makes a fun little center.


Here's a build-your-own matchbox car race track.  I'd actually try to mount a version of this low on a wall for a built-in play center. 
 
Like putting a race track on the wall, I love this idea of making ball tubes out of raingutter parts. The picture shows it done on a fence so it can be for balls or water, but I'd do in in the basement too:
Lowe's via Learning through the Clutter

This is the same idea, but designed for water(which I'd also love to make for outside.)I'd use those green nerf balls:
familylicious


Now combine the magnet wall ...
with the ball runs made from pvc pipe parts and do this:

For some instructions for a suction cup version that could be adapted to magnets, go here.
The Brooding Hen

PLAY TIME
How cool would this door be for a playroom door?  Once again, hit Habitat ReStore for an old solid wood door and you'd probably be able to do something similar:

While were stretching things a bit, how fun would this be for those unfinished concrete basement floor? That would be such a blast!  Before we finished our basement, we bought 6 of those square gym scooters and man were they fun! (Those balance bikes for toddlers would be fun too!)

You can't forget the old favorite of a little area for a play kitchen.  There are so many darling ideas on the web for repurposing old furniture.  I thought these were adorable:
A hutch top

 An old nightstand (perfect for a little space)

 An old TV Cabinet

Probably from scratch, but darling ideas:

And check out this amazing store from mostly IKEA parts:
Domestic Candy blog


Scour the thrift shops and garage sales for fake food or look online for TONS of darling felt foods to make yourself:
 via whilewearingheels



INDOOR PLAYGROUNDS
Along with our slide, we also have one of those great IKEA swings:

Here are so other amazing swing ideas for stores as well as ideas you could do yourself:


from Hearth Song
(if you've never checked this place out, you must!  Some of our favorite toys came from here.)


Don't forget just a good ole' tire swing as an idea, even inside.

Do your kids love to climb?  Here's some simple to BIG ideas:

How simple is that idea?  Normal height ceilings and bars from metal pipes.  I think the next one is from a manufacturer, but you could duplicate this one easily with the same pipe idea:

On the indoor playground idea, there are a lot of teeter totter ideas you can make. I think these are cute and could be made so cheaply (people are getting rid of free tires on craigslist all the time!)
She's crafty


Perhaps this one is a bit big, but I love the tractor seats!

Make a simple balance beam like this.  It doesn't have to cost much and doesn't need to be high at all to be fun and safe.  Paint it a cute color and avoid splinters.


READING AREAS
Of course, any kid-friendly space HAS to have a reading area.  Here are a couple cute ideas:
Shelves from raingutters again

Shelves from those $4 spice racks at IKEA

Shelf made from a free wood pallet

Darling tree-shaped bookshelf
viarosenberry

And every reading area needs a soft, cushy area. These are made by sewing together standard pillows and their cases:


No rest for the creative

I think these square pillows look comfy and would be great for fort building. I think they're from Pottery Barn, but you could do it cheaper with old couch pillows or better yet, how about those crib mattresses that are a dime a dozen because no one wants them.  They'd be lightweight, yet comfy and easy to clean before putting on new covers.

These are darling ones made out of large-sized bandanas.  You can order them in bulk online for really cheap.


Okay, so this is outside, but how fun would this be in a wall between rooms or to let some light in to that under-stairs closet-turned kid nook?  They're really not very expensive and easy to install.

Okay, here's a project I've been dreaming of doing ever since seeing the life-size pin art board at the Rockford Children's museum.  I've got a number of ideas, but it still would cost more than I can justify. It was going to involve an awful lot of cocktail Stir Rods...  But wouldn't that be sooo cool?

Inspired yet?  Anyone ready for me to help finish your basement into a fun area for your family?  It makes me wish I could go back to some of the basements we had in previous homes and try again!

Wednesday, December 19, 2012

Knock-off Aidan Gray Chandelier

Ever since I first started seeing the Aidan Gray Chandeliers popping up on decor sites and in the mags, I've loved the antique-look of them.  They have delicate, spindly arms with iron and gray/white distressed finishes.  They look like something you picked up in a flea market in France or Italy.  What I love about them is that they can go with many different styles.  I've seen them in the fancier Italian or ornate rooms to cottage to shabby chic to french country to vintage.  They have visual punch without being overly heavy.
 
Cote de Texas
Cote de Texas
 
There are other versions of turned wood and metal by other makers and different styles.
 
via cote de texas
via pure style home
 
 
11 magnolia lane
 
in the fun lane
 
Horchow
 
 
 
Restoration Hardware
 
Tami owen
 
 
They range from $3000 to around $1400 for the Aidan Gray ones.  While the Aidan Gray are considered "reasonably priced" that's still about $1000 above what I could ever spend.  I really wanted one for my newly redecorated den, so I looked for some alternatives.
 
This Low-priced Option  is $400 and my Mom got it for closer to $300 on Cyber Monday.
Salento 9-light by Quorum
 
This one is $300:
Salento 6-light by Quorum
 
 
And then I found my budget one: $110 (I used a discount coupon and got it for $90!)
Cost Plus World Market
 
 Yup, that's my price for this project!  It had the smaller scale I needed for this room and the spindly arms so that it didn't hog the room visually.
 
(messy desk, sorry.  The teens are in the middle of finals.)
 
 
The one down to this light is that it has this ugly black wiring that is just plain weird.  It sticks out way too much.  Luckily, I only have a few inches of it showing.  If I were to use this as a dining light, I'd either paint the black wire or use a cloth cord cover.
 
Lovely holes, huh?  The builder didn't put in any wiring for a light in this room so my hubby had to cut a few holes to run wiring.  Patching comes next!
 
You can see the fun gray distressed finish.
 
I'm very happy with this finishing touch for our den.  Patch the ceiling holes and hide the computer wires and we are done in here!!! YEAHHH.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Related Posts with Thumbnails